The Temperature Control is a mobile device for heating and cooling. This machine suits excellently for setting a desired temperature in tanks or other systems and maintaining it. It is particularly used in wineries to control the temperature in the fermentation process. This machine is developed especially for decentralized application. The machine is connected by hose to the heating or cooling jacket on the tank. The unit is easy to set up.
- connect fresh water
- connect the flow and return with the tank
- connect the power supply – and switch it on
Thereupon the Temperature Control automatically fetches water and fills respectively vents the system. The current temperature is displayed and the set-point temperature can be selected. If the desired set-point temperature is higher than the current temperature, the device will heat. If the set-point temperature is lower than the current temperature, the device will pump fresh water (cooling water) to cool the system down. Due to a largely dimensioned pump, which causes a very quick water circulation, the device is able to react to even small temperature changes.
Electrical power: 18 kW
Pump performance: 0,55 kW
Max. output: 80 l/h
Water supply: GEKA
Maximum pressure: 3,0 bar
Electrical connection: 3/N/P 400 V
Connection cable: approx. 5 m
Protection: 20 A
Connecting plug: CEE 5 pol. 32A
Length 750 mm
Width: 500 mm
Height: 1400 mm
Weight: approx.75 kg
Illustrations and technical data are not binding. Design changes are reserved.